LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 178 (Interior Trim) >> Repair Instructions >> Trim Panel Replacement - Upper Center Pillar >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Body Pillar Upper Trim Panel
    GM313692Courtesy of GENERAL MOTORS CORP.
  1. Install the body pillar upper trim panel to the vehicle by aligning the locator tabs.
  2. Align the body pillar upper trim panel retainers to the holes and pushing in on the retainers to secure them.
  3. Install door opening seals to edge of body pillar upper trim panel.
  4. Install the seat belt shoulder belt guide loop. Refer to Shoulder Belt Guide Adjuster Replacement - Front in Seat Belts.
scientia non olet · About LEMON Manuals