LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 178 (Interior Trim) >> Repair Instructions >> Trim Panel Replacement - Cowl Side >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Cowl Side Trim Panel
    GM315270Courtesy of GENERAL MOTORS CORP.
  1. Install the cowl side trim panel to the vehicle by aligning the trim panel with the slots in the cowl.
  2. Install the cowl side trim panel retainers by pushing in on the panel to secure.
  3. Install the I/P insulator panel. Refer to Knee Bolster, Insulator, Molding Replacement - Instrument Panel .
  4. Install the front door sill plate. Refer to Door Sill Plate Replacement (Door)  or Door Sill Plate Replacement (Sliding Door) .
scientia non olet · About LEMON Manuals