Cupholder Replacement - Front Floor Console
WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Cupholder Replacement - Front Floor Console
| Callout | Component Name |
|---|---|
|
NOTE:
Refer to Fastener Notice
in Cautions and Notices. Fastener Tightening Specifications:
Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the front floor console. Refer to Console Replacement - Front Floor . |
|
| 1 | Screw, Front Floor Console Cup Holder (Qty: 4) Tighten: 2 N.m (18 lb in) |
| 2 | Cup Holder Assembly, Front Floor Console |
| 3 | Liner, Front Floor Console Cupholder |