Circuit/System Verification
WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- With no weight in the passenger seat observe the passenger seat belt status indicator. Turn ON the ignition, the indicator should illuminate for 5 seconds.
- If the indicator is always ON or always OFF, refer to Indicator Circuit Test in Circuit/System Testing .
- Ignition ON and with the passenger seat occupied, observe the passenger seat belt status indicator while connecting and disconnecting the seat belt. The indicator should turn ON and OFF when changing seat belt states.
- If the indicator illuminates incorrectly, refer to Switch Circuit Test in Circuit/System Testing .