LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Power Steering System) >> Repair Instructions >> Power Steering Pump Pulley Replacement (L26) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the power steering pump from the engine for clearance. Refer to Power Steering Pump Replacement (L26)  or Power Steering Pump Replacement (LY7)  or Power Steering Pump Replacement (LS4) .
    2. Fig 1: Identifying Power Steering Pump Assembly
    GM293353Courtesy of GENERAL MOTORS CORP.
  2. Using J 25034-C  remove the power steering pump pulley from the power steering pump.
scientia non olet · About LEMON Manuals