Odometer Trip/Reset Switch Inoperative
Odometer Trip/Reset Switch Inoperative
| Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
| Schematic Reference: Instrument Cluster Schematics | ||||
| 1 | Did you perform the Instrument Cluster Diagnostic System Check? | - | Go to Step 2 | Go to Diagnostic System Check - Instrument Cluster |
| 2 | - Press the trip/reset switch. Does the display switch between odometer/trip and also reset the trip? |
- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
| 3 | Replace the IPC. Refer to Instrument Panel Cluster (IPC) Replacement . Did you complete the replacement? |
- | Go to Step 4 | - |
| 4 | Operate the system in order to verify the repair. Did you correct the condition? |
- | System OK | Go to Step 2 |