Brake Fluid Loss
- Were you sent here from SYMPTOMS - HYDRAULIC BRAKES? If so, go to next step. If not, go to DIAGNOSTIC STARTING POINT HYDRAULIC BRAKES under TROUBLE SHOOTING.
- Inspect the hydraulic brake system for proper operation. See HYDRAULIC BRAKE SYSTEM under SYSTEM TESTS. Did you find and correct a condition? If so, go to step 7 . If not, go to next step.
- Inspect the disc brake system for proper operation. See DISC BRAKE SYSTEM under SYSTEM TESTS. Did you find and correct a condition? If so, go to step 7 . If not, go to next step.
- Inspect the drum brake system, if equipped, for proper operation. See DRUM BRAKE SYSTEM under SYSTEM TESTS. Did you find and correct a condition? If so, go to step 7 . If not, go to next step.
- Separate the master cylinder from the vacuum brake booster. Do not disconnect any brake pipes. See MASTER CYLINDER under REMOVAL & INSTALLATION. Inspect the rear of the master cylinder for a brake fluid leak. Inspect for brake fluid in the vacuum brake booster. Did you find a brake fluid leak? If so, go to next step. If not, go to DIAGNOSTIC STARTING POINT HYDRAULIC BRAKES under TROUBLE SHOOTING.
- Replace the brake master cylinder and the vacuum brake booster. See MASTER CYLINDER , VACUUM BRAKE BOOSTER under REMOVAL & INSTALLATION. After repairs are complete, go to next step.
- Install or connect components that were removed or disconnected during diagnosis. Road test the vehicle to confirm proper operation. Is the condition still present? If so, go to step 2 . If not, system is okay.