Removing anti-roll bar link

WARNING: Vehicle may slip off the vehicle hoist if the vehicle hoist is handled incorrectly.
Danger! Immobilization period-threatening injuries!

Observe safety instructions on raising the vehicle using a vehicle hoist.
For additional information see: RAISING THE VEHICLE WITH A VEHICLE LIFT .

Preliminary work

Refer to REMOVING REAR LEFT OR RIGHT WHEEL .
Refer to REMOVING THE COVER OF THE CAMBER CONTROL ARM .

Release screw (2) on the control link (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Press control link (3) slightly down in the arrow direction.
Release nuts (2). If necessary, counter support at the Torx socket.
Feed out and remove anti-roll bar link (1).

Courtesy of BMW OF NORTH AMERICA, INC.