Install temperature sensor

• Coat the sealing ring on the temperature sensor (2) with the approved rear axle differential oil.
• Screw in the temperature sensor (2) a few turns by hand.
• Tighten the temperature sensor (2).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Temperature sensor on lid of the M Sport differential rear axle differential
  M12	tightening torque	14 Nm

• Connect connectors (1) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to CHECK/TOPPING UP OIL LEVEL IN THE REAR AXLE DIFFERENTIAL (M SPORT DIFFERENTIAL) .