Check tires (if available, emergency wheel also)
NOTE:
TECHNICAL INFORMATION
Repair possible defects for a separate charge after discussion with the customer.
Repair possible defects for a separate charge after discussion with the customer.
Preliminary work
- Refer to CHECKING LIGHTING SYSTEM .
- Refer to CHECKING HORN, HEADLIGHT FLASHERS AND HAZARD WARNING FLASHERS .
- Refer to CHECKING THE WINDSHIELD WIPER AND THE WASHER SYSTEM .
- Refer to CHECKING BLOWER .
- Refer to CHECKING THE INTERIOR LIGHTING .
- Refer to CHECKING SAFETY BELTS .
- Refer to CHECKING THE WARNING TRIANGLE, HIGH-VISIBILITY VEST AND FIRST-AID KIT .
- Refer to CHECKING MOBILITY SET .
Check
- Check the tread depth of all tires with the tire tread gauge.
- Check the tire tread surface and flanks for incisions and foreign bodies such as nails or screws.
- Check tread wear pattern for worn out areas and for one-sided wear.
Result
» Tires worn or damaged.
Measure
- Replace the tires on a separate invoice and, if required, carry out the wheel alignment.
Check
- If fitted: Check the tire pressure in the emergency wheel.
Result
» Tire pressure too low or too high.
Measure
- Adjust the tire pressure as per the specification.