Installing the wiring harness for the convertible top latch

WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.

Position and clip wiring harness (4) into all the holders.
Position Hall effect sensors (2).
Secure the left and right expanding rivets (1).
Connect plug connection (3) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.
Connect plug connection (3) and lock.
Position convertible top drive (2).
Align the convertible top drive with the markings made and tighten screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING CONVERTIBLE TOP BOW, FRONT .
Refer to ADJUSTING DOOR WINDOW GLASS .
Refer to ADJUSTING THE REAR SIDE WINDOW .