Installing the pedal mechanism

WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.

Install pedal mechanism (1).
Replace the screw (2).
Parts: Screw
Tighten down screw (2).

TIGHTENING TORQUE SPECIFICATIONS

Pedal bracket on body
M8 Replace screw.	tightening torque	22 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Replace nuts (3).
Parts: Nuts
Tighten nuts (3).

TIGHTENING TORQUE SPECIFICATIONS

Pedal bracket on body
M8 Replace nuts.	tightening torque	22 Nm

Engage the brake pedal (1) in the arrow direction with the brake booster.

Courtesy of BMW OF NORTH AMERICA, INC.

Make sure that the bolt of the brake booster

(2) engages with the holder of the brake pedal (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE CLUTCH MASTER CYLINDER .
Refer to INSTALLING THE TRIM PANEL FOR THE PEDAL ASSEMBLY .
Refer to INSTALLING THE COVER OF THE ENGINE COMPARTMENT ON THE REAR LEFT .