Installing the steering wheel/M Sport steering wheel
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
- Align mark (1) on steering wheel to mark (2) on steering column.
- Position the steering wheel.
Check
- Possibly, a microencapsulated screw (1) has been installed.
Check the screw connection.
Result
» The screw (1) is micro-encapsulated.
Measure
- Clean thread in steering column.
Renew the screw (1).
Parts: Screw
- Tighten down screw (1).
TIGHTENING TORQUE SPECIFICATIONS
| Steering wheel to steering column | ||
| M14 Only with microencapsulated screw: Renew screw. | tightening torque | 62.5 Nm |
Follow-up work
- Refer to INSTALLING THE WIRING HARNESS (M SPORT STEERING WHEEL) .
- Refer to INSTALLING THE IMPACT PLATE (M SPORT STEERING WHEEL) .
- Refer to INSTALLING THE VIBRATION ACTUATOR (M SPORT STEERING WHEEL) .
- Refer to CONNECTING THE CONNECTOR FOR THE STEERING WHEEL HEATING .
- Refer to INSTALLING SPORT BUTTON .
- Refer to INSTALLING THE COVER FOR THE M SPORT STEERING WHEEL .
- Refer to INSTALLING THE SHIFT PADDLE FOR THE AUTOMATIC TRANSMISSION .
- Refer to INSTALLING THE AIRBAG UNIT (M SPORT STEERING WHEEL) .
- Refer to CONNECTING ALL BATTERY GROUND LEADS .