Removing the sealing sleeve for the transmission housing
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
Preliminary work
- Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
- Refer to REMOVING THE TRANSMISSION OIL PAN (GA8HP76Z) .
- Refer to REMOVING THE OIL VOLUME RESERVOIR (GA8HP50Z, GA8HP51Z, GA8HP75Z, GA8HP76Z, GA8HP95Z) .
- Refer to REMOVING TRANSMISSION CROSS-MEMBER .
CAUTION:
Materials harmful to health
.
Contact with fluids harmful to health!
Contact with fluids harmful to health!
- Note and follow safety instructions on containers.
- Conduct all work in appropriate personal protective equipment only.
- Turn the connector (1) in arrow direction and detach it.
- Do not touch pins.
- Release cable from holders.
- Insert the special tool 0 494 213 (24 2 390) in arrow direction in the sealing sleeve (1).
- Release the screw (1) and unlock the sealing sleeve with the slide (2).
- Observe the installation position of the sealing sleeve (1).
- Pull out the sealing sleeve (1) in arrow direction.