Installing the front spring strut
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
- Position the spring strut (1).
- Screw in the screws (1) by two turns.
- Attach the cable (1) on the holder (2).
Follow-up work
- Refer to INSTALLING SPRING SUSPENSION STRUT .
- Refer to REMOVING THE TOP SWIVEL BEARING ATTACHMENT .
- Refer to FASTENING THE WISHBONE TO THE TOP OF THE SWIVEL BEARING .
- Refer to ATTACHING THE FRONT SPRING STRUT .
- Refer to INSTALLING THE HOOD SEAL LEFT OR RIGHT .
- Refer to INSTALLING THE COVER IN THE ENGINE COMPARTMENT AT THE REAR LEFT OR RIGHT .
- Refer to FASTENING THE OUTPUT SHAFT ON THE WHEEL BEARING .
- Refer to INSTALLING FRONT LEFT OR RIGHT WHEEL .