Install steering column shroud lower section
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rubber plugs (1) from the steering column shroud lower section.
- Clip in the gap cover (1) into the steering column shroud lower section (2) (arrows).
- Secure the wire (1) to the holder (2).
- Insert the line (1) at the guide (3).
- Connect the connectors (1) and (2).
NOTE:
Perform the steps on the right and left side.
- Align the steering column shroud lower section (3) to the steering column using the retaining lug (2).
- Push the steering column shroud lower section (3) upwards in arrow direction until the lug (1) locks with the retaining lug (2).
Follow-up work
- Refer to FITTING STEERING COLUMN SHROUD UPPER SECTION .