LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2025 >> 230i >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Body Equipment - Repair) >> Floor/Luggage/Eng Comp Tr. Panels >> 51 47 161 Removing And Installing/Replacing Right Trunk Wheel Arch Trim

51 47 161 Removing And Installing/Replacing Right Trunk Wheel Arch Trim

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 BMW M3, 2005 BMW M3, 2004 BMW M3, 2003 BMW M3, and 2002 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove socket housing for tail light in side section, refer to 63 21 055 REPLACING A SOCKET HOUSING FOR LEFT OR RIGHT REAR LIGHT (COUPE, CONVERTIBLE) .
  2. Version with through-load system:
  3. Remove rest side section from rear seat backrest, refer to 52 26 008 REMOVING AND INSTALLING/REPLACING LEFT OR RIGHT SIDE SECTION OF REAR SEAT BACKREST (THROUGH-LOADING SYSTEM) (COUPE) .

Take out luggage compartment floor trim panel (1).

Remove cover for spare wheel/jack.

Fig 1: Removing Luggage Compartment Floor Trim Panel
G03119224Courtesy of BMW OF NORTH AMERICA, INC.

Pull out emergency release mechanism for tank cap a little. Unclip cable (1) from clip (2).

Fig 2: Unclipping Cable From Clip
G03119225Courtesy of BMW OF NORTH AMERICA, INC.

Turn rotary clip (1) through 90° and remove.

Fig 3: Identifying Rotary Clip
G03119226Courtesy of BMW OF NORTH AMERICA, INC.

Partially release panel for trunk separating wall.

Partially lever out outer trim (1) and remove trunk wheel arch trim (2).

Fig 4: Removing Trunk Wheel Arch Trim
G03119227Courtesy of BMW OF NORTH AMERICA, INC.