Installing the throttle body

• Replace the sealing ring (1) with the special tool  0 496 714 (00 9 030)  .

  Parts:  Sealing ring

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position throttle body (2).
• Connect connectors (1) and lock.

  The connector (1) must engage audibly.

• Install the throttle body (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Throttle body to intake plenum
  6X50	Tightening torque	7 Nm

• Replace the screw (1).

  Parts:  Screw

• Tighten down screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to PARTIALLY INSTALLING THE CHARGE AIR LINE .
• Refer to INSTALLING ACOUSTIC COVER .