Removing the cylinder head from the assembly jig

CAUTION: Heavy component.
Heavy components can lead to injury or damage.

Remove and install heavy components with the aid of another person/other persons.

Release the screws (1) from the special tool 0 494 150 (11 9 440) .

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screw (2).
Feed out rod (1) In arrow direction and set aside.

Courtesy of BMW OF NORTH AMERICA, INC.
Stage the special tool (workshop crane) 2 220 718 .

Courtesy of BMW OF NORTH AMERICA, INC.
Prepare the special tool 0 490 567 (110 020) .

Courtesy of BMW OF NORTH AMERICA, INC.
Insert and install the special tool 0 490 567 (11 0 020) at the cylinder head (1).
Attach the special tool 0 490 567 (11 0 020) to the workshop crane 2 220 718 .

Courtesy of BMW OF NORTH AMERICA, INC.
Feed out and remove the cylinder head (1) with the workshop crane 2 220 718 and special tool 0 490 567 (11 0 020) from the device (2).

Courtesy of BMW OF NORTH AMERICA, INC.