Lowering the headlining with the sliding/tilting sunroof
NOTE:
RISK OF DAMAGE
Fold the headlining.
Damage to the headlining. If necessary, the headlining must be replaced.
Fold the headlining.
Damage to the headlining. If necessary, the headlining must be replaced.
- Carry out tasks with a second person to assist.
- Support the headlining at the front and back.
Preliminary work
- Refer to REMOVING REAR SEAT BENCH .
- Refer to REMOVING LEFT AND RIGHT BACKREST SIDE SECTION .
- Refer to REMOVING THE INNER DOOR SILL COVER STRIP ON THE LEFT AND RIGHT .
- Refer to REMOVING THE SEAT BELT FINISHER STRIP AT THE LEFT AND RIGHT .
- Refer to REMOVING SIDE TRIM PANEL, REAR LEFT AND RIGHT .
- Refer to TRIM OF THE 3RD BRAKE LIGHT .
- Refer to REMOVING THE B-PILLAR TRIM PANEL AT LEFT AND RIGHT .
- Refer to REMOVING RIGHT C-PILLAR TRIM PANEL LEFT AND RIGHT .
- Refer to REMOVING INTERIOR ROOF LIGHT .
- Refer to REMOVING A-PILLAR TRIM PANEL, LEFT AND RIGHT .
- Refer to REMOVING LEFT AND RIGHT SUN VISORS .
- Refer to REMOVING COUNTER SUPPORTS FOR SUN VISOR ON LEFT AND RIGHT .
- Refer to REMOVING THE FRONT VANITY MIRROR LIGHT .
- Refer to REMOVING THE HANDS-FREE MICROPHONE LEFT AND RIGHT .
- Refer to REMOVING THE ROOF FUNCTION CENTER (FZD) .
- Refer to REMOVING THE COVERS FOR THE INTERIOR MIRROR .
Precondition
The front seats have been fully adjusted towards the bottom.
The front seat backrests are fully reclined.
The rear seat backrest is folded down toward the front.
- Release screws (1)
.
- Loosen screw (1) .
- Unclip the headlining on the clips (2)
downwards.
- Unclip headlining (1) downwards from clips (2) .
- Carefully unclip headlining (1)
from the sliding/tilting sunroof case and clamps and the clamps (3)
in the area of the dotted line.NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.
- With the help of another person, feed out the headlining (1) from the respective edge protections.
- Place the headlining (1)
in the vehicle with an support person.