Install Hood
NOTE:
RISK OF DAMAGE
Mechanical effects .
Paint damage .
Mechanical effects .
Paint damage .
- Mask those working areas at risk with yellow plastic adhesive tape.
- Remove and install heavy or bulky components with the aid of another person/other persons.
NOTE:
Perform the steps on the right and left side.
- Fit the hood and position it on the hinge.
- Support the hood.
- Tighten nuts (1) and (2).
TIGHTENING TORQUE SPECIFICATION
Hood to the hinge Nut M8 Tightening torque 19 Nm
Follow-up work
- Refer to ADJUSTING HOOD .
- Refer to ACTIVATE ELECTRICAL SYSTEM .
- Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .