Installing the seal for the glass slide/tilt roof panel

• Position the seal from the glass slide/tilt roof panel (1)  on the groove on the glass slide/tilt roof panel (2)  and press in.

  Ensure that seal (1)  rests fully all around the glass slide/tilt roof panel.

  NOTE: Coat the seal with a suitable lubricant.
  CONSUMABLE SPECIFICATION
  
  

  Lubricant M

  30 ml

  83 19 2458653

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING GLASS SLIDE/TILT SUNROOF PANEL .
• Refer to CHECKING THE SETTING OF THE GLASS SLIDE/TILT SUNROOF PANEL .
• Refer to ADJUSTING GLASS SLIDE/TILT SUNROOF PANEL .
• Refer to INITIALIZING THE GLASS SLIDE/TILT SUNROOF .
• Refer to INSTALLING THE BELLOWS FOR THE GLASS SLIDE/TILT SUNROOF .