Install the backrest cover of the rear seat backrest

• Position the backrest cover on the cushion.
• Secure all trim wires with clamps.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace the clamps (2).

  Parts:  Clamps

• Insert the clamp (2) with the special tool  0 492 668 (52 0 050)  .
• Clasp the trim wire (3) of the cushion (1) and the trim wire (4) of the backrest covering with the clamp (2) and bend the clamp (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE BACKREST FRAME FOR THE RIGHT REAR SEAT BACKREST .
• Refer to REMOVING THE REAR PANEL FROM THE REAR SEAT BACKREST .
• Refer to INSTALLING THE GUIDE SLEEVE FOR THE REAR HEAD RESTRAINT .
• Refer to INSTALLING THE HEAD RESTRAINT .
• Refer to INSTALLING THE REAR SEAT BACKREST .
• Refer to INSTALLING THE REAR SEAT .