Install the decorative strip on the right dashboard
- Check the clamps (arrows) for damage and replace if necessary.
- Connect associated connector.
- Correctly position the decorative strip on the right (3) and clip into the clamps (2) .
- Tighten down screw (1) .
TIGHTENING TORQUES SPECIFICATION
| decorative strip | ||
|---|---|---|
| screw | Tightening torque | 1.8 Nm |
Follow-up work
- Check the clamps (arrows) for damage and replace if necessary.
- Connect associated connector.
- Correctly position the decorative strip on the right (3) and clip into the clamps (2) .
- Tighten down screw (1) .
TIGHTENING TORQUES SPECIFICATION
| decorative strip | ||
|---|---|---|
| screw | Tightening torque | 1.8 Nm |
Follow-up work