Install decorative strip on center of dashboard

Check the clamps (1) for damage and replace if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.
Connect connector (1).
The connectors must engage audibly.
Clip the wiring harness into the holder (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Correctly position the decorative strip (1) and clip onto the clamps (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Check the clamps (1) and the pins (2) and replace if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.
Install the decorative strip (1) and connect and lock the existing connector.
Correctly position the decorative strip (1) and engage at the clamps (2) and the pins (3).

Courtesy of BMW OF NORTH AMERICA, INC.