Installing rear reflector

Check 

• Check the detents (1)  on the rear reflector (2)  for damage.

  Courtesy of BMW OF NORTH AMERICA, INC.

  Result 

  » Detents (1)  are damaged.

  Measure

  • Replace rear reflector (2)  .
• Install the rear reflector and clip in with the detents (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE REAR BUMPER TRIM (PARTIALLY REMOVED) .
• Refer to INSTALLING THE TAIL LIGHT ON THE REAR LEFT SIDE PANEL .
• Refer to INSTALLING TAIL LIGHT ONTO REAR RIGHT SIDE PANEL .
• Refer to INSTALLING REAR PANEL .
• Refer to INSTALLING COVER FOR WATER CHANNEL ON LEFT AND RIGHT .
• Refer to INSTALLING THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE LEFT AND RIGHT (PARTIALLY REMOVED) .
• Refer to INSTALLING LOADING EDGE TRIM .
• Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .