Removing the rear diffuser
NOTE:
RISK OF DAMAGE
Mechanical effects
Paint damage
Mechanical effects
Paint damage
- Mask those working areas at risk with yellow plastic adhesive tape
- Remove and install heavy or bulky components with the aid of another person/other persons
NOTE:
In order to guarantee the quality of the Driver Assistance functions in vehicles with concealed radar sensors, please read and comply with the following notes:
Preliminary work
- Refer to REMOVING LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to REMOVING THE LOADING EDGE TRIM .
- Refer to PARTIALLY REMOVING LEFT AND RIGHT LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .
- Refer to REMOVING THE TRIM FROM THE LEFT AND RIGHT WATER CHANNELS .
- Refer to REMOVING THE TAIL LIGHT ON THE LEFT AND RIGHT SIDE PANEL .
- Refer to REMOVING REAR BUMPER PANEL .
- Refer to REMOVING THE COVER FOR THE TOW FITTING .
- Refer to REMOVING THE REAR LEFT AND RIGHT ATTACHMENT PART .
- Refer to REMOVING THE TRIM ON THE LEFT BUMPER COVER .
- Refer to REMOVING THE TRIM ON THE RIGHT BUMPER COVER .
- Release the expanding rivet (1)
- Release the diffuser (2) at the detents (arrows) and remove it