Remove the lower B-pillar trim panel
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING REAR SEAT BENCH .
- Refer to REMOVE DOOR SILL COVER STRIP .
- Refer to REMOVE REAR ENTRANCE COVER STRIP .
- Refer to REMOVING THE B-PILLAR TRIM PANEL .
- Unclip the B-pillar trim panel (1) with the special tool 0 496 569 (00 9 325) on the clips (2) .
- Feed out and remove the B-pillar trim panel (1) at the lip of the edge protection at front and rear.