Check the gap dimension of the hood

NOTE: TECHNICAL INFORMATION
The gap dimensions form the basis for these repair instructions and must be observed without fail.
For additional information see: BODY DIMENSIONS .

Check

Check the gap dimensions between the hood and the adjoining components.

Courtesy of BMW OF NORTH AMERICA, INC.

TECHNICAL DATA SPECIFICATION

Gap dimension hood to side panel
1 hood; 2 side panel	a	3.3 ⁺¹_-1 mm
Courtesy of BMW OF NORTH AMERICA, INC.	b	0.5 ^+1.6_-1.6 mm

TECHNICAL DATA SPECIFICATION

Gap dimension hood to headhight
1 hood; 2 headlight Courtesy of BMW OF NORTH AMERICA, INC.	a	5.3^+1.8_-1.8 mm

TECHNICAL DATA SPECIFICATION

Gap dimension from hood to bumper cover
1 hood; 2 bumper cover	a	3.5 ^+1.2_-1.2 mm
Courtesy of BMW OF NORTH AMERICA, INC.	b	1.0 ^+1.5_-1.5 mm

Desired state

Gap dimension does not correspond to the secondary document BODY GAP DIMENSIONS (G82) , or BODY GAP DIMENSIONS (G83) .

Result

» Gap dimension does not correspond to the secondary document BODY GAP DIMENSIONS (G82) , or BODY GAP DIMENSIONS (G83) .

Measure

Adjusting hood.