Adjusting glass slide/tilt sunroof panel

Preliminary work 

• Refer to CHECKING THE SETTING OF THE GLASS SLIDE/TILT SUNROOF PANEL .
• Refer to REMOVING THE BELLOWS FOR THE GLASS SLIDE/TILT SUNROOF .

• Close glass slide/tilt sunroof lid (2).
• Slacken screws (1) at the left and right such that the glass slide/tilt roof panel (2) can just be shifted.
• Shift the glass slide/tilt roof panel (2) until the right position is reached.
• Tighten down screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Panorama glass roof lid to mechanics
  M5 Replace screws.	Tightening torque	4.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INITIALIZING THE GLASS SLIDE/TILT SUNROOF .
• Refer to INSTALLING THE BELLOWS FOR THE GLASS SLIDE/TILT SUNROOF .