Remove the module bracket from the front door

Preliminary work 

• Refer to DEACTIVATING THE 48 V ELECTRICAL SYSTEM .
• Refer to DEACTIVATING ELECTRICAL SYSTEM .
• Refer to REMOVING FRONT DOOR TRIM PANEL .

• Unlock plug connections (1) and disconnect.
• Unclip the wiring harness (2) at the module bracket of the front door.
• Release the rubber grommet of the Bowden cable for the inner door opener (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Open the bayonet closures (1) by turning and remove the module bracket of the front door (3).

  While doing so, feed out the Bowden cable for the inner door opener (2) from the module bracket of the front door (3).

  Courtesy of BMW OF NORTH AMERICA, INC.