LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2023 >> M240i >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Electrical Drives -- Repair (G42) >> 67 61 Drive For Sunroof >> 67 61 580 Replacing drivetrain for glass slide/tilt roof panel (after vehicle diagnosis) (230i, 230i xDrive, M240i, M240i xDrive) >> Removing the drivetrain for the glass slide/tilt roof panel

Removing the drivetrain for the glass slide/tilt roof panel

NOTE: RISK OF DAMAGE 
Careless handling of tools and sharp-edged components. 
Scratches, surface damage. 
  • Protect working area.
  • Handle tools and components carefully.
NOTE: RISK OF DAMAGE 
Electrostatic discharge. 
Damage to or destruction of electrical components. 
  • Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
  • Read and comply with user information on using the associated special tool 12 7 060  .
  • Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
  • Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
  • For additional information see: NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .
NOTE: TECHNICAL INFORMATION 
Perform window removal using the "spider".
For additional information see: REMOVING WINDOWS WITH A "SPIDER" .
NOTE: TECHNICAL INFORMATION 
The following procedure forms the basis for these repair instructions and must be observed without fail.
For additional information see: GENERAL PROCEDURE FOR THE DISASSEMBLY AND INSTALLATION OF BONDED WINDOW GLASS .

Preliminary work 

Precondition

The glass slide/tilt roof panel is closed.