Installing the rear emblem
- Install emblem (1) and connect and lock the existing connectors while doing this.
- Guide emblem (1)
into the tailgate.
- Tighten the nuts (1) .
TIGHTENING TORQUE SPECIFICATIONS
| Emblem on rear trim | ||
|---|---|---|
| hexagon nut M5 | Tightening torque | 3 Nm |
- Insert the hose pipe (1) in the spray nozzle and snap it in.
Follow-up work
- Refer to INSTALLING THE TAILGATE TRIM PANEL .
- Refer to INSTALLING THE SWITCH FOR THE AUTOMATIC TAILGATE OPERATION .
- Refer to INSTALLING TRUNK COMPARTMENT LIGHT ON TRUNK LID .
- Refer to INSTALLING THE TRIM ON THE SIDE REAR WINDOW FRAME ON THE LEFT AND RIGHT .
- Refer to INSTALLING THE TRIM FOR THE TOP REAR WINDOW FRAME .
- Refer to INSTALLING THE REAR STORAGE SHELF .