Installing the right diffuser
NOTE:
Description is for left component only. Procedure on the right side is identical.
Install the diffuser
- Insert the diffuser (2) and position it correctly.
- Tighten the nuts (1) and screws (arrows).
TIGHTENING TORQUE SPECIFICATIONS
| Undershield/diffuser | ||
|---|---|---|
| Hexagon bolt or hexagon nut | Tightening torque | 2.3 Nm |
Follow-up work
- Refer to INSTALLING THE CENTER DIFFUSER .
- Refer to INSTALLING THE REAR UNDERBODY PANELLING .