LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2022
>>
iX
>>
Repair and Diagnosis
>>
Body & Frame
>>
Exterior/Interior Trim
>>
Body Equipment (2 Of 2) -- Repair (IX)
>>
51 75 UNDERSHIELD
>>
51 75 110 Remove and install/replace rear underbody protection
>>
Installing the rear underbody panelling
Installing the rear underbody panelling
Insert the undershield
(1)
.
Tighten screws (arrows).
TIGHTENING TORQUE SPECIFICATIONS
Undershield/diffuser
Hexagon bolt or hexagon nut
Tightening torque
2.3 Nm
Courtesy of BMW OF NORTH AMERICA, INC.