Install brake guard plate, front
- Install brake guard plate (2) .
- Replace screws (1)
.
Parts: Screws
- Insert screws (1)
and tighten.TIGHTENING TORQUE SPECIFICATIONS
Brake guard plate at front swivel bearing M6x12
Replace screw.tightening torque 8 Nm
Follow-up work
- Refer to INSTALLING THE FRONT BRAKE DISCS .
- Refer to CLEANING THE BRAKE CALIPER .
- Refer to INSTALLING FRONT BRAKE PADS .
- Refer to PLACING THE BRAKE PADS ON THE BRAKE DISK/PUTTING THEM INTO OPERATION .
- Refer to INSTALLING THE FRONT BRAKE PAD WEAR SENSOR .
- Refer to INSTALLING THE FRONT LEFT AND RIGHT WHEELS .
- Refer to COMMISSIONING/BEDDING (BRAKE) IN NEW BRAKE PADS AND BRAKE DISCS .