Install center radiator grille
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
Check
- Check the detents (1) for damage.
Result
» Detents (1) are damaged.
Measure
- Replace center front radiator grill.
- Depending on equipment, connect and lock the connector.
- Position the center front ornamental grille and clip it into all detents (2) from the front.
- Tighten down screw (1) .
TIGHTENING TORQUE SPECIFICATION
| Front center radiator grill on top air flap control | ||
|---|---|---|
| Oval-head screw M6 | Tightening torque | 4.6 Nm |
Follow-up work
- Refer to INSTALLING THE COVER FOR CENTER ENGINE COMPARTMENT .
- Refer to INSTALLING THE FRONT HOOD SEAL .