Install front cross connection

• Insert and install the front cross connection (4)  .
• Tighten the screws (3)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

  TIGHTENING TORQUE SPECIFICATION
  
  

  Front cross connection
  Hexagon screw M8x20	tightening torque	19 Nm

• Tighten the screws (2)  .
  TIGHTENING TORQUE SPECIFICATION
  
  

  Front cross connection
  Combination clamping screw, thermoplastic	tightening torque	3 Nm

• Tighten the screws (1)  .
  TIGHTENING TORQUE SPECIFICATION
  
  

  Front cross connection
  Oval-head screw M10x20	tightening torque	25 Nm

Follow-up work 

• Refer to INSTALLING FRONT CROSS CONNECTION .
• Refer to INSTALLING THE MOUNTING FOR THE FRONT BUMPER COVER .
• Refer to INSTALLING FRONT BUMPER COVER .
• Refer to INSTALLING THE SEAL FOR THE HOOD GASKET LEFT AND RIGHT .
• Refer to INSTALLING THE FRONT HOOD SEAL .