Install the trim on the side panel

• Feed in the trim (2)  at rear correctly position.
• Tighten down screws (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

  TIGHTENING TORQUE SPECIFICATION
  
  

  Trim on side panel
  M6x20 screw	tightening torque	3 Nm

• Tighten down screws (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

  TIGHTENING TORQUE SPECIFICATION
  
  

  Wheel arch cover
  Screw	Tightening torque	2.6 Nm
  Nut	Tightening torque	2.6 Nm

Follow-up work 

• Refer to ATTACHING DOOR SILL TRIM PANEL .
• Refer to INSTALLING THE FRONT SILL TRIM .
• Refer to ATTACHING THE COVER TO THE SIDE SECTION .
• Refer to INSTALLING THE MOUNTING FOR HOOD SEAL .