Installing the guide for the rear bumper panel at the side

• Correctly position the guide for the rear bumper panel at the side (3)  .
• Tighten nuts (2)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Bumper guide, rear
  Nut
  	Tightening torque	6 Nm

  Courtesy of VOLVO CARS CORPORATION

• Tighten down screw (1)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Bumper panel, rear
  Hexagon screw
  	Tightening torque	3.0 Nm

Follow-up work 

• Refer to INSTALLING REAR BUMPER PANEL  .
• Refer to INSTALLING REAR REFLECTOR .
• Refer to INSTALLING TAIL LIGHT ON LEFT AND RIGHT SIDE PANEL .
• Refer to INSTALLING THE FLAP IN THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT .
• Refer to INSTALLING THE FLAP IN THE LEFT LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .