Install the luggage compartment trim panel on the right side panel

Installing the luggage compartment trim panel on the side panel

• Check if the clip (1) is available and is damaged and replace if necessary.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Carefully feed in the luggage compartment trim panel (2) at the trunk lid lock and position it correctly on the tailgate seal.
• Clip in the luggage compartment trim panel (2) at the clip (3).
• Install the expanding rivet (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE FLAP IN THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT .
• Refer to INSTALLING THE RIGHT REAR SIDE TRIM PANEL UPPER SECTION .
• Refer to INSTALLING THE RIGHT D-PILLAR TRIM PANEL .
• Refer to INSTALLING THE RIGHT C-PILLAR TRIM PANEL .