Install the ornamental grille on the bumper cover on the side
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Correctly position the ornamental grille (1) and engage into latch mechanisms (arrows).
- G05/G07 only:
- Attach trim (1) and engage into latch mechanisms (arrow).
Follow-up work
- Refer to INSTALLING FOG LIGHT SUPPORT .
- Refer to INSTALL BUMPER COVER, FRONT .
- Refer to INSTALLING THE ULTRASONIC SENSOR AT THE FRONT LEFT .
- Refer to PARTIALLY INSTALLING THE FRONT SECTION OF THE FRONT WHEEL ARCH COVER ON THE LEFT AND RIGHT .
- Refer to PARTIALLY INSTALLING THE LEFT FRONT AND RIGHT WHEEL ARCH TRIM .
- Refer to INSTALL FRONT ORNAMENTAL GRILLE .