Partially installing the left front and right wheel arch trim
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Description is for left component only. Procedure on the right side is identical.
Partly install the front wheel arch trim
Check
- Check the clips (2) for damage and replace where required.
The sealing ring must not be damaged or missing.
- Check detents (1) for damage.
Result
» The detents (1) of the wheel arch trim are damaged.
Measure
- Replace wheel arch trim.
- Engage the wheel arch trim (1) into the detents (2) in the area of the bumper cover.