Removing the instrument cluster

NOTE: RISK OF DAMAGE
Electrostatic discharge .
Damage to or destruction of electrical components .

Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
Read and comply with user information on using the associated special tool 12 7 060.
Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
For additional information see: 61 35... NOTES ON ESD (ELECTROSTATIC DISCHARGE) PROTECTION

Preliminary work

Refer to ADJUSTING THE STEERING COLUMN POSITION .
Refer to DEACTIVATING THE 48 V ELECTRICAL SYSTEM .
Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
Refer to REMOVING THE GAP COVER .

NOTE: RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .

Protect working area.
Handle tools and components carefully.

NOTE: RISK OF DAMAGE
Damage of high-quality surfaces .
Plastic wedges can damage high-quality surfaces .

Protect surfaces from damage.

Mask decorative strip (1) with yellow plastic adhesive tape (2) as shown.
CONSUMABLE DESCRIPTION

Yellow plastic adhesive tape 83199410979

Courtesy of BMW OF NORTH AMERICA, INC.
Release the screws (1) on the instrument cluster (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Unclip cover (1) from clamps (2).
Feed out and remove the cover (1) in arrow direction.

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screws (1).
Guide out holder (2) upwards and remove it.

Courtesy of BMW OF NORTH AMERICA, INC.
Release screw (1) for instrument cluster (2).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.
Fir the plastic adhesive tape (1) on to the decorative strip (2).
CONSUMABLE DESCRIPTION

Yellow plastic adhesive tape 83199410979

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: TECHNICAL INFORMATION
Conduct the following operation with the assistance of a second person.
Unlock the lock (1).
Pull out instrument cluster (2) from clamp (3) in the arrow direction.
Guide the instrument cluster (1) out a little.

Courtesy of BMW OF NORTH AMERICA, INC.

Courtesy of BMW OF NORTH AMERICA, INC.
NOTE:
RISK OF DAMAGE
Damage to the instrument cluster (KOMBI) or the head unit
A ground offset can occur when releasing and connecting the cables. This can generate currents that render the instrument cluster (KOMBI) or the head unit unusable .
- When releasing: First release the APIX data cable (blue).
- When connecting: Connect the APIX data cable (blue) last.
NOTE: TECHNICAL INFORMATION
Conduct the following operation with the assistance of a second person.
Unclip the cable bracket at the marked points,
Unlock plug connections (1) and disconnect,
Feed out and remove the instrument cluster (2).