Install the camshaft position sensor of the camshaft outlet on the right
- Check the O-ring (1) for damage and replace if necessary.
- Coat sealing ring (1)
with lubricant.
- Feed in and install the camshaft position sensor (3) of the exhaust camshaft.
- Tighten down screw (2) .
TIGHTENING TORQUES SPECIFICATION
| Camshaft position sensor to cylinder head cover | ||
|---|---|---|
| Torx screw M6 | Tightening torque | 8 Nm |
- Connect connectors (1)
and lock.
The connector (1) must engage audibly.
Follow-up work
- Refer to INSTALLING BRACKET FOR RIGHT INTAKE SILENCER .
- Refer to INSTALLING THE RIGHT INTAKE SILENCER HOUSING .
- Refer to INSTALLING ACOUSTIC COVER .