Install the seat belt finisher strip

NOTE: Description is for left component only. Procedure on the right side is identical.

Position seat belt finisher strip (3) .
Secure expanding rivet (1) .
Tighten the screws (2) .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE BOTTOM C-PILLAR TRIM PANEL .
Refer to INSTALLING C-PILLAR TRIM PANEL .
Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .
Refer to INSTALLING THE FLAP IN THE LEFT LUGGAGE COMPARTMENT TRIM PANEL .
Refer to INSTALLING THE LEFT OR RIGHT LUGGAGE COMPARTMENT LAMP .
Refer to INSTALLING D-PILLAR TRIM PANEL .
Refer to INSTALLING COVER OF THE SEAT BELT FINISHER STRIP .
Refer to INSTALLING BACKREST SIDE SECTION .
Refer to INSTALLING LOADING EDGE TRIM .
Refer to INSTALLING THE BATTERY COVER .
Refer to INSTALLING COVER FOR THE SIDE MEMBER .
Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .
Refer to INSTALLING THE STORAGE SHELF .