Install inner door opener

• Saw off all the welding pins on the inner door opener (1) along the molding (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Remove welding remnants on door trim panel with a scalpel.
• Install the inner door opener (1) and lock on the snap-in lugs (2).
  NOTE: The welding pins must not protrude through the door trim panel.
• Screw in and tighten the repair screws (arrows).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Inner door opener to door trim panel
  screw	Tightening torque	2.3 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

  CONSUMABLE SPECIFICATION
  
  

  Repair screw  Delta PT4

  ø4 mm. l = 12 mm,

  07149200941

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE FIBER-OPTIC CONDUCTOR FOR THE DOOR OPENER .
• Refer to INSTALLING FRONT DOOR TRIM PANEL .
• Refer to MOUNTING THE MIRROR TRIANGLE COVER .