Installing the cover on the inside of the window frame at the rear

• Start from the rear and connect the cover (1) to the doorframe.
• Clip in cover (1) into clips (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Correctly feed in cover on window frame (1) into the gap of the rubber window seal (2).
• Make sure that the cover (1) is correctly fitted on the door weather strip.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Only for G07 with optional equipment roller sunblind: 
• Start from the rear and connect the cover (1) to the doorframe.
• Clip the cover into the clip (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Correctly position the cover (1) on the door frame and clip in.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Start from the top and connect the cover (1) to the doorframe.
• Clip the cover into the clip (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Correctly feed in cover on window frame (1) into the gap of the rubber window seal (2).
• Make sure that the cover (1) is correctly fitted on the door weather strip.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING REAR DOOR TRIM PANEL .