Installing fan cowl
WARNING: This page is about a different car, the 2022 BMW X7, 2021 BMW X7, 2020 BMW X7, and 2019 BMW X7. However, it is still accessible from the selected car via links, so may be relevant.
- Feed in and install the fan cowl (2) in the direction of the arrow.
- Lock left and right locking mechanisms (1).
- Fasten the coolant hose to the clamps (1).
- Pin up connector (2) and lock audibly.
- Pin up connector (3) and lock audibly.
- Fasten the coolant hose to the clamps (1) at bottom on the fan cowl.
Follow-up work
- Refer to INSTALLING FRONT UNDERBODY PROTECTION .
- Refer to INSTALLING THE REAR TOP CROSS CONNECTION .
- Refer to INSTALLING TENSION STRUT ON LEFT AND RIGHT SHOCK TOWER .
- Refer to INSTALLING UPPER CROSS CONNECTION .
- Refer to INSTALLING THE COVER IN THE ENGINE COMPARTMENT AT TOP LEFT AND RIGHT .