Install the right tank vent valve
- Thread in and install the tank vent valve (2) on the bracket.
- Connect and lock tank vent line (3).
The tank vent line (3) must engage audibly.
- Connect connectors (1) and lock.
The connector (1) must engage audibly.
- Connect the tank vent line (1) below the throttle body to the right intake plenum and lock it.
The tank vent line (1) must engage audibly.
Follow-up work
- Refer to INSTALLING FAN COWL .
- Refer to INSTALLING THE LEFT UNFILTERED-AIR DUCT .
- Refer to INSTALLING INTAKE FILTER HOUSING .
- Refer to INSTALLING THE RIGHT STRUT BRACE .
- Refer to INSTALLING THE STRUT BRACE .
- Refer to INSTALLING ACOUSTIC COVER .
- Refer to INSTALLING THE REAR TOP CROSS CONNECTION .
- Refer to INSTALLING TENSION STRUT ON LEFT AND RIGHT SHOCK TOWER .
- Refer to INSTALLING UPPER CROSS CONNECTION .
- Refer to INSTALLING THE COVER IN THE ENGINE COMPARTMENT AT TOP LEFT , and INSTALLING THE COVER IN THE ENGINE COMPARTMENT ON THE TOP RIGHT .